Manual pouring
simple & upgradable design
The manual pourTECH™ system is equipped with hydraulic stopper rod actuator unit including necessary hydraulic, pneumatic, and hardware systems. It operates on horizontal and vertical mold lines, and will perform as follows:
- Operator controls the flow of molten metal from the nozzle into the mold by opening and closing the stopper.
- Opertator will position the pouring unit with the nozzle over the pouring cup.
- By joystick, he will open and close the stopper manually.
In case of Mg-treated iron a pneumatic driven stopper twist and plunger can be supplied.
Profit from manual pouring
simple design
For your individual requirements constructed.
plug & play installation
pour-tech engineers are not needed for installation and start-up.
possibility to upgrade
For a higher level of automation the system is designed to accommodate additional needed sensors and equipment.
Perfekte Lösung für Ihre Gießerei?
For a profitable and efficient use of manual pouring the use case, individual requirements and production properties play a decisive role. The criteria listed below provide a rough guide to check if this automation level is the optimal solution for you. Please note that these criteria are weighted on a case-by-case basis.
pourTECH™ manual system for pouring molten metal into a sand mold from a bottom pouring ladle or furnace, by stopper rod and nozzle. The manual pourTECH™ System is equpped with hydraulic stopper rod actuator unit including necessary hydraulic, pneumatic, and hardware systems. It operates on horizontal and vertical mold lines, and will perform as follows:
- Operator controls the flow of molten metal from the nozzle into the mold by opening and closing the stopper.
- Opertator will position the pouring unit with the nozzle over the pouring cup.
- By joystick, he will open and close the stopper manually.
In case of Mg-treated iron a pneumatic driven stopper twist and plunger can be supplied.
Profit from manual pouring
simple design
For your individual requirements constructed.
plug & play installation
pour-tech engineers are not needed for installation and start-up.
possibility to upgrade
For a higher level of automation the system is designed to accommodate additional needed sensors and equipment.
Perfect solution
for you?
For a profitable and efficient use of manual pouring the use case, individual requirements and production properties play a decisive role. The criteria listed below provide a rough guide to check if this automation level is the optimal solution for you. Please note that these criteria are weighted on a case-by-case basis.
